LCP Portfolio

These micro medical components have been injection molded using Liquid Crystal Polymer (LCP), a thermoplastic material that can fill ultra-thin walls and other micro features while offering strength and rigidity.

Overmolded Micro Electrodes

Micro Material: These medical components are made from Liquid Crystal Polymer (LCP). Micro Features: 0.004″ (0.1016mm) wall required for this overmolded part. The final part outer diameter measures 0.047″ (1.1938mm). Description: These overmolded micro...

Micro Needles

Micro Material: The micro needle device is made from LCP (Liquid Crystal Polymer). Micro Features: The needle has a 5 micron tip radius (left). Description: This test specimen illustrates the difference between an MTD high-precision molded micro needle (left) with a 5...

Micro Assembly

Micro Material: The device is made from Glass Filled LCP (Liquid Crystal Polymer). Micro Features: The micro electronic assembly device features two 0.028″ (0.71 mm) diameter shafts. Description: The objective was to assemble 5 pieces with minimal amount of...

Strain Relief Device

Micro Material: This ablation tip is molded Glass Filled LCP (Liquid Crystal Polymer). Micro Features: The device design features 0.030″ (0.76 mm) ID and 0.950″ (24.13 mm) OAL. Description: The strain relief device has extremely long flow length; minimum...

Translate »