Micro Materials: The device is molded in PC (Polycarbonate), a thermoplastic material. Micro Features: The flow tube device OD is about .0065″ and the ID is about .0046″. The diameter of the hole is .033″. Description: The flow tube device part is...
Micro Materials: This device is molded from PEEK (PolyEther Ether Keytone). Micro Features: 0.022″ (0.56 mm) ID Passage for the implant. Description: This PEEK implant is used as a soft tissue-bone anchor device in orthopedic or minimally invasive reconstructive...
Micro Material: This ablation tip is molded Glass Filled LCP (Liquid Crystal Polymer). Micro Features: The device design features 0.030″ (0.76 mm) ID and 0.950″ (24.13 mm) OAL. Description: The strain relief device has extremely long flow length; minimum...
Micro Material: The device is molded of confidential thermoplastic material. Micro Features: There isn’t a straight line on this connector. Average wall thickness of 0.008″ (0.20 mm). Description: The vascular connectors are surgical implants that form...
Micro Material: The device is molded of Polypropylene (PP), a thermoplastic material. Micro Features: The micro nozzle component key feature is a 60 micron diameter (0.0024″), thin walled, exit hole with micron tolerances Description: Micromolded Pipette Tip...
Micro Material: The clip is made of Ultem 1010 thermoplastic resin. Micro Features: The clip component measures 0.009″ (0.23 mm) in wall thickness. Description: The clip device is made of a high-strength polymer that flows better than PEEK, but not as good as...
