Micro Material: These medical components are made from Liquid Crystal Polymer (LCP). Micro Features: 0.004″ (0.1016mm) wall required for this overmolded part. The final part outer diameter measures 0.047″ (1.1938mm). Description: These overmolded micro...
Micro Material: This bioabsorbable spiral-shaped tack is micro injection molded using a bioabsorbable polymer. Micro Features: The dead-sharp tip of this micro medical part design is critical to its function. Description: Unconventional tool construction methods were...
Micro Material: This micro medical device is overmolded with a medical grade acrylic. Description: Flow lines seen under high magnification show how gently the cavity was filled to be able to successfully encapsulate the substrate without causing damage to the sensor....
Micro Materials: This biopsy marker device is molded from 20% BaSO4-filled PEEK (PolyEther Ether Keytone). Micro Features: The implant is 1.5mm in diameter, with small holes that are 0.5mm in diameter. Description: This long-term PEEK medical implant required...
Micro Materials: The vascular micro medical device is molded in PC (Polycarbonate), a thermoplastic material. Description: Diamond turned inserts were required to achieve optical clarity in one area of the design. Do you have similar features on your new micro medical...
Micro Material: This micro medical device is overmolded with Pebax, a thermoplastic elastomer (TPE). Micro Features: Extremely thin walls (.003″) were required to minimize the overall part size. Description: These delicate medical circuit boards needed to be...
