Implant Portfolio

Bioabsorbable Fastener

Bioabsorbable Fastener

Micro Materials: This device is made of PLG (L-lactide/glycolide copolymer), a bioabsorbable polymer.Micro Features: The bioabsorbable fastener has two hollow legs connected by a flexible “bridge” and features sharp tips. Its flash allowance is 0.1mm max.Description:...
Bioabsorbable Fixation Screw

Bioabsorbable Fixation Screw

Micro Material: This fixation screw is made out of PLDL, a bioabsorbable polymer. Micro Features: World’s smallest bioabsorbable unscrewing mold. Description: This fixation tack is used with a mesh in hernia repair surgery. As opposed to a bioabsorbable staple,...
Undermolded PEEK Anchor Device

Undermolded PEEK Anchor Device

Materials: The undermolded anchor device is made from PEEK. Description:  The anchor device is “under molded”. Yes, it’s possible! Are you developing an overmolded micro medical device? Talk to MTD.   MTD specializes in overmolding—a process for...
Implantable Ligating Clip

Implantable Ligating Clip

Micro Material: The implantable device is molded from a confidential thermoplastic material Micro Features: The ligating clip features a crescent-shaped window which measures 0.010″ (0.25 mm) wide. Description: Yes, it snaps closed! The average cross section is...
Bioabsorbable Tack

Bioabsorbable Tack

Micro Materials: Bioabsorbable Tack Micro Features: The bioabsorbable tack sharp points must be less than 0.0002″R. Description: Economical micro processing of bioabsorbable materials require minimum runner sizes to reduce waste. Bioabsorbable materials degrade...
Vascular Connector

Vascular Connector

Micro Material: The device is molded of confidential thermoplastic material. Micro Features: There isn’t a straight line on this connector. Average wall thickness of 0.008″ (0.20 mm). Description: The vascular connectors are surgical implants that form...
Translate »