Implant Portfolio

Bioabsorbable Spiral Tack

Micro Material: This bioabsorbable spiral-shaped tack is micro injection molded using a bioabsorbable polymer. Micro Features: The dead-sharp tip of this micro medical part design is critical to its function. Description: Unconventional tool construction methods were...

PEEK Biopsy Marker

Micro Materials: This biopsy marker device is molded from 20% BaSO4-filled PEEK (PolyEther Ether Keytone). Micro Features: The implant is 1.5mm in diameter, with small holes that are 0.5mm in diameter. Description: This long-term PEEK medical implant required...

Ear Tube Implant

Micro Material: This implantable ENT device is molded from ethylene vinyl acetate (EVA). Micro Features: The tube design features an internal diameter of 1mm. Description: The ear tube required no gate vestige to avoid skin irritation during use. Because EVA is a very...

Implantable Strain Relief

Micro Material: The implantable device is molded from Polypropylene (PP). Micro Features: The medical design required zero draft throughout, and featured 0.5mm (0.012″) diameter holes throughout the 1.3″ long part design. Description: The inside geometry...

Spring-Shaped Bioabsorbable Tack

Micro Materials: This implantable tack is made of a bioabsorbable polymer. Micro Features: All tolerances are +/-.002″ throughout. Ultra-sharp points with no discernible radius measured. Description: This bioabsorbable tack required an extremely complex tool...

Bioabsorbable Fixation Suture

Micro Materials: This device is made of a bioabsorbable polymer. Micro Features: This unique bioabsorbable fixation suture design required an extremely challenging tooling approach. Extremely tight tolerances throughout required for part functionality. Description: A...